FIB Lift-Out Grids and Grid Boxes
PELCO® FIB Lift-Out TEM Grids – Available in Cu, Mo and Si
The PELCO® FIB Lift-Out TEM Grids have been designed for in-situ lift to attach the TEM lamellas milled out by SEM/FIB or FIB systems. The design has been optimized for access and flexibility. The nominal diameter of the sturdy PELCO® FIB Lift-Out Grids is 3mm. These grids fit an all standard TEM holders and provide a full view of the thin section attached to the posts.
Copper PELCO® FIB Lift-Out Grid TEM Grids
The typical thickness of the copper lift-out grids is 35um +/-5um. The Cu FIB lift-out grids also have a thinner ridge on the inside, where the lamellas can be attached and are protected when stored. Available with either one or two wider v-shaped posts or four narrow flat posts with identification number etch through. Use single or dual wider posts for attaching single lamellas or the four posts for attaching a larger number of lamellas. Size of wide post is 250 x 35 x 190µm (W x D x H), size of narrow post is 80 x 35 x 190µm (W x D x H). Sold in packs of 100. FIB grid with 2 wide posts available with thickness of 55µm ±5µm as well.
FIB GRID,2 POSTS, CU, VIAL/100
PELCO® FIB Lift-Out TEM Grids, 2 wide posts, copper
FIB GRID,4 POSTS, CU, VIAL/100
PELCO® FIB Lift-Out TEM Grids, 4 narrow posts, copper
FIB GRID, 1 POST, CU, VIAL/100
PELCO® FIB Lift-Out TEM Grids, single, wide post, copper
FIB GRID,2 POSTS,CU,55UMT,V10
PELCO® FIB Lift-Out TEM Grids, 2 wide posts, copper, 55µ thickness
Molybdenum, Silicon & Half Grid PELCO® FIB Lift-Out Grid TEM Grids
FIB GRIDS,4 POSTS, SI, PKG10
PELCO® FIB Lift-Out TEM Grids, 4 narrow posts, silicon
FIB GRIDS,2 POSTS, MO, VIAL/25
PELCO® FIB Lift-Out TEM Grids, 2 wide posts, molybdenum
PELCO FIB HALF GRID, CU, 25/VL
PELCO® Half Grids for FIB Applications
Omniprobe® Lift-Out Grids
The Omniprobe® Lift-Out Grids are specifically designed to accept the TEM lamellas milled out by FIB or SEM/FIB systems. Typical thickness of the grids is 25-30µm with a diameter of 3mm. The posts are designed for optimum access and provide a secure area for attaching (welding) the lamella(s). The Omniprobe® grids fit standard TEM holders and provide a non-obscured view of the thin sections attached to the posts.
Available in standard Cu with 3, 4 and 5 posts and in Mo With 3 and 4 posts. All Lift-Out Grids have multiple indexed mounting positions for easy identification and positioning in the TEM.
OMNIPROBE BE HALF RING GRIDS
Omniprobe® Beryllium Half Ring Grids, Be
OMNIPROBE CU, 5 LIFT-OUT GRIDS
Omniprobe® Lift-Out Grids, Cu with 5 posts
OMNIPROBE CU, 4 LIFT-OUT GRIDS
Omniprobe® Lift-Out Grids, Mo with 3 posts
OMNIPROBE CU, 3 LIFT-OUT GRIDS
Omniprobe® Lift-Out Grids, Cu with 3 posts
OMNIPROBE CU, 3 LIFT-OUT GRIDS
Omniprobe® Lift-Out Grids, Cu with 3 posts, shallow downset
FIB Grids Storage Boxes
